Products
Hardware
|
Hardware
Hardware Accessories Even the most well-intentioned climbing partner might accidentally snag one of your unmarked carabiners. Keep track of your costly equipment by marking it with this ID and Gear Marking tape. Carabiners, cams and slings get all mixed up after a long day of swapping leads and sharing a climbing rack, so mark your gear to make sorting it out simple. Choose a couple different colors to create a unique color combination so you'll know for sure which gear is yours. Each tape roll measures 60 ft. long x 0.5 in. wide.
|
|
Hardware
Pulleys This C.A.M.P. USA small fixed pulley with brass bushing features fixed side plates that make it ideal for quickly rigging a hauling system with an ascender. Aluminum side plates connect at the bottom for a stable rigging system that has a breaking strength of 20kN. Fixed side plates allow quick installation on a rope and attachment to an ascender. Requires a locking oval or HMS carabiner; cannot be used with a D-shaped carabiner. Accepts ropes up to 12mm in diameter.
|
|
Hardware
Belay And Rappel Devices Designed with belaying in mind, the Super 8's versatile dual-hole design allows use with single or double ropes. Made of lightweight-yet-tough drop-forged aircraft-quality 7075-T6 aluminum for superior strength and durability. Soft-anodized coating wears smoothly; less chance of developing rope-damaging edges.
|
|
Hardware
Belay And Rappel Devices Lightweight and easy to use, the Black Diamond ATC belay device will become a favorite belay/rappel accessory on your rack. Made of drop-forged aircraft-quality 7075-T6 aluminum, the ATC is light and strong. Versatile double-slot design allows you to feed single or double ropes smoothly, yet hold falls with ease. Large surface area dissipates heat quickly.
|
|
Hardware
Belay And Rappel Devices Give yourself ultimate control over any rappel or belay with this truly variable friction device. Variable friction design gives greater control over a multiple of rope diameters. Use HFM (high friction mode) for thin ropes, wet conditions or rapping with a heavy haul bag. Use LFM (low friction mode) when rapping with a fuzzy 11mm rope or speed rapping in your camo. Die-cast 380 aluminum is 44% heavier and 20% harder than the original ATC for even more durability. Versatile double-slot design allows you to feed single or double ropes smoothly, yet hold falls with ease: won't kink the rope.
|
|
Hardware
Belay And Rappel Devices Designed for climbers who want complete belay and rappel functions in a single device, the Black Diamond(R) ATC Guide offers maximum versatility. Made from durable, hot-forged anodized 7075-T6 aluminum, the ATC Guide can handle rope sizes from 7.7 - 11mm in a variety of adverse situations. Variable friction design gives great control with many rope diameters. Use LFM (low friction mode) when rapping with a fuzzy 11mm rope or speed rappelling. Use HFM (high friction mode) for thin ropes, wet conditions or rapping with a heavy haul bag. In Guide mode device allows easy lowering of climber regardless of weight disparity between climber and belayer. Guide mode utilizes large clip-in hole that easily fits over the largest sleeves of standard locking carabiners, making setup a breeze. Because Guide mode can effectively lock the rope, a release hole in the front of the device can be used to release tension and allow better control. Coated retainer wire keeps device in place. Versatile double-slot design allows you to feed single or double ropes smoothly, yet hold falls with ease: won't kink the rope.
|
|
Hardware
Pulleys This pulley is designed to be used in rescue work or hauling as a means of gaining mechanical advantage. Features two large carabiner rigging points on wide skirted side plates of red anodized aircraft aluminum. Glass-filled, silicone impregnated celcon sheave. Dimensions 4.5" x 3" with a sheave diameter of 2.375". The Sheave rides on a hardened axle which has been ground for maximum durability.
|
|
Hardware
Pulleys The C.A.M.P. USA Large Mobile pulley works well on large ropes that are used in rescue situations, rigging and big-wall climbing. Strong construction is designed to handle intensive use and heavy loads; ideal for use in rescue situations, rigging and big-wall climbing. Rotating side plates allow easy placement anywhere along the rope. Aluminum side plates, aluminum sheave and steel bearings stand up to regular use. Great for use with fat ropes; accommodates ropes up to 15mm in diameter.
|
|
Hardware
Caving Search And Rescue Made specifically for high-angle rescue work, the Rescue 8's versatile design and features fit the job it's designed for. Extended "horns" on upper portion of large ring prevent the rope from sliding up and locking off. Large upper oval allows use of large and heavy-duty ropes. Dual tie-in holes keep Rescue 8 attached to harness while rope is tied to carabiner--no possibility of dropping during life-threatening situations. Made of hot-forged 6061 T-6 aircraft-quality aluminum and hard-anodized for durability, lower rope friction and a breaking strength of 10,000+ pounds.
|
|
Hardware
Pulleys This pulley is designed to be used in rescue work or hauling; good for hostile environments and uses no nylon parts. The pulley features two large carabiner rigging points on wide skirted side plates of blue anodized aircraft aluminum. Aluminum pulley sheave is permanently sealed with lubricated needle bearings for smooth operation and long life. Measures 4.5" x 3" with a sheave diameter of 2.375". The Sheave rides on a hardened axle which has been ground for maximum durability.
|
